产品名称 > 热固油墨系列

发布日期:2016-01-16热固油墨直角厚板(Plastisol ink)
名称: 热固油墨直角厚板(Plastisol ink)
编号: FH-903
规格: 20KG、桶
产品类别:热固油墨系列
适用于:针织鞋帽印花
价格:
生产厂家:幸运印花材料有限公司
Product name Plastisol ink                
State Paste
Packing 25KG/drum for white, 20KG/drum for other colors
Storage 12 months in cool place
Application 1. Suitable for automatic, manual printing, can create 3D sharp up and round up effects etc.
2. Suitable for all fabrics which endurable in high temperature of 150-180 degree.
Features 1. High fastness
2. High glossy
3. High softness
4. SGS detecting passed, no phthalate, no heavy metal, no NPEOs.
Mix proportion Plastisol ink 100%, or can be intermixed with other colored plastisol inks
Printing process Method 1st:
1. Printing with the clear plastisol ink for 3~4 times (3-4 scrapes per time)
2. Printing again with colored plastisol ink for 2 times(3-4 scrapes per time)
3. Baking for 1~3 minutes under 150~180℃ to dry it.
4. Finish.
Method 2nd:
1. Mixing clear plastisol ink 50% with colored plastsiol ink 50%.
2. Printing for 4~5 times(3-4 scrapes per time)
3. Baking for 1~3 minutes with 150~180℃ to dry it fast.
4. Finish.
Attentions 1. The fabric must endurable in hot temperature, it’s not suitable for airtight fabric.
2. Thick screen is suggested for the best effect .
3. Basement process can make better washing ability.
品名 低温热固油墨              
外观 膏状
包装 白色25KG/桶,其他色20KG/桶
贮存期 常温下12个月
应用 100%棉、棉/涤混纺、涤纶、深浅色布、牛仔布等各种织物,凡满足以下两点的织物均可使用:
1. 能耐150C~180C;
2. 有透气性,可以使油墨渗透进去。不适合的承印物比如:塑料、金属、玻璃等及经防水处理的尼龙布。
卖点 1. 超强洗水牢度
2. 高亮度
3. 手感柔软
4. 符合美国ASTM对邻苯二甲酸脂和欧盟EN71 Part 3对重金属含量的要求
调配比例  100%热固油墨,或用不同颜色相互调配成其他色
工艺流程 1. 丝网选用100-120目厚板,用丝印硬方刀75度刮印, 以透明油墨打底1-2次,印第一次时用力刮4-6刀
2. 印彩色油墨2-3次(或直接印彩色油墨3-4次,不需打底)
3. 150-180度焙烘过热1-3分钟。
注意事项 1. 打底可使弹力和牢固度更好,并节省成本         
2. 每次返印前需要用热风枪将墨层吹至表干,以免返粘网板 
                             


分享到

数据库

Copyright © 1999-2015 幸运印花材料有限公司 版权所有 粤ICP备15007798号-1